top of page
ONE
.png)
Extremely versatile, the sled can be configured for any camera on the market including Arri, Black Magic, Red, sony Venice, you name it
It is, strong, rigid, and lightweight.
The modular design can be easily modified, upgraded, and maintained.
our exchandable post can help you switch to 1.75" and adapt accesories like the volt, or stay with the 2" post to use cyclo, omega or most remote heads.
Easily attachable STANDARD BETZ dovetail
Regulation fore/aft and side by side controllers you can adjust weight distribution effortlessly to deliver perfect dynamic balance.
Vibration free
.png)
Featuring aluminum 7075 and Swiss Hibrid ceramic dry bearings the Gimbal is a super smooth Perfectly centered.
With a tool-free clamp mechanism smartly positioned to not interfiere with the operators hand placement.
manufacured with the hightest tolerance in the CNC Machine.
12 and 24 FULL POWER
2 Batteries Hotswap,
the 3rd Battery will work in series only for 24V.
3x 12v power D-tap outputs on the upper box with a maximum draw of 10 amps combined.
1x 12V Lemo 1B outputs with a maximum draw of 15 amps.
1x 12V Lemo 1B outputs on the Lower box with a maximum draw of 15 amps.
24V volts outputs on the upper box with a maximum draw of 15 Amps.
2 x HDSDl 6G (OPTIONAL 12G can be add)
MONITOR AND BATTERIES SWIVEL ROSSETE SYSTEM
ROTATE 180 DEGREES WITH A STRONG SOLID LOCK and vibration free
180 DEGREES
SWIVEL
Telescopic rods can be extended to increase panning inertia, while the center battery can be moved back and forth. Additionally, the rods can be mounted sideways to help balance the weight distribution in every axis.
50MM AND 1.75-INCH CARBON FIBER POST
For maximum stability, Rever features a 50mm wide, 2-section carbon fiber post. Fully extendable up to 120cm – great for high mode and low mode.
Now you can order the sled with our new custom post 1.75" inches design to fit the Steadicam M2 gimbal with the Steadicam volt kit.
Attaches to the center of gravity of the monitor with 2 1/4 thumb knobs
with the rotating system the monitor position can be adjusted without any tool
Fits on the lower and center post.
If utilizing the telescopic system, you can attach 5 to 8 inches monitors with side mounts 1/4holes
bottom of page